Search
Titanium Dioxide Acetic Acid Citric Acid Sodium Hydroxide Oxalic Acid Ethyl Acetate
Sign in/Join free

Chloroform

CAS No.: 67-66-3
Formula: CHCl3
Molecular Weight: 119.38
Suppliers: All(0) China Suppliers(0) Products(0)
  • Description
  • Basic Info
  • Safety Info
  • MSDS
  • Price
What is Chloroform

**Introduction to Chloroform** Chloroform (CHCl₃), also known as trichloromethane, is a colorless, volatile liquid with a sweet, ether-like odor. It was historically used as an anesthetic in the 19th century but has since been replaced due to safety concerns, including toxicity and potential liver damage. Today, chloroform is primarily employed in industrial and laboratory settings as a solvent for fats, resins, and rubber. It also serves as an intermediate in chemical synthesis, particularly in the production of refrigerants and pharmaceuticals. Due to its hazardous nature—carcinogenic and harmful if inhaled or absorbed—strict handling precautions are required. Proper storage and ventilation are essential to minimize health risks.

Preparation Process: Chloroform (CHCl₃) is prepared through the haloform reaction, where acetone or ethanol is treated with chlorine and a base (e.g., sodium hydroxide). The steps are as follows: 1. **Chlorination**: Acetone (CH₃COCH₃) reacts with chlorine (Cl₂) in the presence of NaOH, undergoing successive substitution of hydrogen atoms by chlorine, forming trichloroacetone (CCl₃COCH₃). 2. **Cleavage**: Trichloroacetone reacts further with NaOH, breaking the C-C bond to yield chloroform (CHCl₃) and sodium acetate (CH₃COONa). 3. **Separation**: The mixture is distilled to isolate chloroform, which is then purified by washing with water and drying over calcium chloride. Alternatively, chloroform can be produced by chlorinating methane under UV light.

Usage Scenarios: Chloroform (CHCl₃) is primarily used as an industrial solvent for resins, rubber, and fats. In laboratories, it serves as a reagent for chemical reactions and extraction processes. Historically, it was employed as an anesthetic, though this use has been discontinued due to toxicity risks. It is also utilized in pesticide formulation and as an intermediate in pharmaceutical manufacturing. Additionally, chloroform aids in DNA and RNA extraction due to its ability to denature proteins. In forensic science, it helps separate compounds during analysis. However, its production and use are regulated due to potential health hazards, including liver damage and carcinogenic effects.

Chloroform Basic Info
Chemical Name Chloroform
Synonyms CHCl3;TRICHLOROMETHANE;TCM;Fisher Chemical;Chloroform 5g [67-66-3];r20;Chloroforme;Trichlormethan;METHYLIDYNE TRICHLORIDE;Residual Solvent Class 2 - Chloroform
CAS No. 67-66-3
Molecular Formula CHCl3
Molecular Weight 119.38
PSA 0.00000
LogP 1.98640
Safely Info
RTECS FS9100000
Hazard Class 6.1
Safety Statements 9-16-26-36-36/37-45-36/37/39-25-23-53-33-7
HS Code 29031300
WGK Germany 3
Packing Group III
RIDADR UN 1888 6.1/PG 3
Risk Statements 45-46-11-23/24/25-36/37/38-48/20/22-40-38-22-67-66-36/38-41-37/38-39/23/24/25-20-63-20/22-36-48/20
Hazard Codes Xn,F,T,Xi
Caution Statement P202-P210-P233-P240-P305+P351+P338-P308+P313
Hazard Declaration H225-H319-H336-H351-H361d-H373
Symbol GHS02,GHS07,GHS08
Signal Word Danger
Chloroform Price
Here is a rough price range for chloroform in the listed countries (prices are approximate and can vary based on market conditions, purity, and supplier):

1. **United States**: $50–$150 per liter
2. **China**: $20–$80 per liter
3. **Russia**: $30–$100 per liter
4. **Germany**: $60–$180 per liter
5. **India**: $15–$50 per liter
6. **Japan**: $70–$200 per liter
7. **Brazil**: $40–$120 per liter
8. **South Korea**: $50–$150 per liter
9. **Philippines**: $25–$70 per liter
10. **United Kingdom**: $60–$180 per liter
11. **France**: $60–$180 per liter
12. **Mexico**: $30–$90 per liter
13. **Canada**: $50–$150 per liter
14. **South Africa**: $30–$100 per liter
15. **Egypt**: $20–$60 per liter
16. **Turkey**: $30–$90 per liter
17. **Thailand**: $20–$70 per liter
18. **Indonesia**: $20–$60 per liter

*Note: Prices are highly dependent on factors like purity, quantity, and supplier. Some countries may have stricter regulations, affecting availability and pricing.*
MSDS
MSDS
Name: Chloroform, Extra Dry, with Molecular Sieves Material Safety Data Sheet
Synonym: Formyl Trichloride; Methane Trichloride; Methane, Trichloro-; Methenyl Trichloride; Methyl Trichloride; Trichlormethan; Trichloroform; Trichloromethane.
CAS: 67-66-3
Section 1 - Chemical Product MSDS Name: Chloroform, Extra Dry, with Molecular Sieves Material Safety Data Sheet
Synonym: Formyl Trichloride; Methane Trichloride; Methane, Trichloro-; Methenyl Trichloride; Methyl Trichloride; Trichlormethan; Trichloroform; Trichloromethane.
SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS
CAS# Chemical Name content EINECS#
||||| | 25377-72-4 |Amylene | <1.0 | 246-916-6
SECTION 3 - HAZARDS IDENTIFICATION EMERGENCY OVERVIEW Harmful if swallowed. Irritating to skin. Limited evidence of a carcinogenic effect. Harmful : danger of serious damage to health by prolonged exposure through inhalation and if swallowed.Light sensitive. Potential Health Effects
Eye:
Causes moderate eye irritation. Contact with liquid causes immediate burning pain, tearing, and reddening of the conjunctiva.
Skin:
Causes mild skin irritation.
Ingestion:
Causes gastrointestinal irritation with nausea, vomiting and diarrhea. May cause liver damage. May cause cardiac disturbances. Aspiration of material into the lungs may cause chemical pneumonitis, which may be fatal. Possible aspiration hazard. May cause hallucinations and distorted perceptions.
Inhalation:
Inhalation of high concentrations may cause central nervous system effects characterized by nausea, headache, dizziness, unconsciousness and coma. May cause cardiac sensitization and possible failure. Inhalation of large amounts may cause respiratory stimulation, followed by respiratory depression, convulsions and possible death due to respiratory paralysis. May be absorbed through the lungs. Causes irritation of the mucous membrane and upper respiratory tract.
Chronic:
Possible cancer hazard based on tests with laboratory animals. Prolonged or repeated skin contact may cause dermatitis. May cause reproductive and fetal effects. Effects may be delayed. Laboratory experiments have resulted in mutagenic effects. Toxicity may be increased by exposure to alcohol, steroids, and ketones. Prolonged exposure may cause liver, kidney, and heart damage.
SECTION 4 - FIRST AID MEASURES
Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.
Ingestion:
Do NOT induce vomiting. If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.
Notes to Physician:
Causes cardiac sensitization to endogenous catelcholamines which may lead to cardiac arrhythmias. Do NOT use adrenergic agents such as epinephrine or pseudoepinephrine. Persons with liver, kidney, or central nervous system diseases may be at increased risk from exposure to this product. Alcoholic beverage consumption may enhance the toxic effects of this substance. Effects may be delayed.
SECTION 5 - FIRE FIGHTING MEASURES
General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Use water spray to keep fire-exposed containers cool. Substance is nonflammable. Vapors may be heavier than air. They can spread along the ground and collect in low or confined areas. Containers may explode when heated.
Extinguishing Media:
Use extinguishing media most appropriate for the surrounding fire. Do NOT get water inside containers. Do NOT use straight streams of water. For small fires, use dry chemical, carbon dioxide, or water spray. For large fires, use water spray, fog or regular foam. Cool containers with flooding quantities of water until well after fire is out.
SECTION 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth), then place in suitable container. Avoid runoff into storm sewers and ditches which lead to waterways. Clean up spills immediately, observing precautions in the Protective Equipment section. Provide ventilation.
SECTION 7 - HANDLING and STORAGE
Handling:
Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Use only in a well-ventilated area. Avoid contact with eyes, skin, and clothing. Do not breathe dust, vapor, mist, or gas. Do not ingest or inhale. Store protected from light.
Storage:
Do not store in direct sunlight. Store in a cool, dry, well-ventilated area away from incompatible substances. Keep away from acids. Do not store near alkaline substances. Separate from strong mineral acids.
SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Engineering Controls:
Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate general or local exhaust ventilation to keep airborne concentrations below the permissible exposure limits. Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin exposure.
Respirators:
A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant a respirator's use.
SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES
Physical State: Clear liquid
Color: Not available.
Odor: sweetish odor
pH: Not available.
Vapor Pressure: 213 mbar @ 20 deg C
Viscosity: 0.56 mPa.s 20 deg C
Boiling Point: 61 deg C @ 760.00mm Hg
Freezing/Melting Point: -63 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: 8g/l water (20C)
Specific Gravity/Density: 1.4890g/cm3
Molecular Formula: CHCl3
Molecular Weight: 119.38
SECTION 10 - STABILITY AND REACTIVITY
Chemical Stability:
Stable at room temperature in closed containers under normal storage and handling conditions. Light sensitive.
Conditions to Avoid:
High temperatures, incompatible materials, light.
Incompatibilities with Other Materials:
Strong oxidizing agents, aluminum, fluorine, magnesium, sodium potassium, lithium, caustics (e.g. ammonia, ammonium hydroxide, calcium hydroxide, potassium hydroxide, sodium hydroxide), dinitrogen tetraoxide, sodium + methanol, potassium-tert-butoxide, chemically active metals, Attacks some forms of plastics, rubbers, and coatings., nitrogen tetroxide, acetone + alkali, disilane, perchloric acid + phosphorus pentoxide, sodium methylate, triisopropylphosphine, sodium methoxide + methanol.
Hazardous Decomposition Products:
Hydrogen chloride, irritating and toxic fumes and gases, carbon dioxide, chlorine, phosgene gas.
Hazardous Polymerization: Will not occur.
SECTION 11 - TOXICOLOGICAL INFORMATION RTECS#: CAS# 67-66-3: FS9100000 CAS# 25377-72-4 unlisted.
LD50/LC50:
CAS# 67-66-3: Draize test, rabbit, eye: 20 mg/24H Moderate; Draize
test, rabbit, skin: 500 mg/24H Mild; Inhalation, rat: LC50 = 47702 mg/m3/4H; Oral, mouse: LD50 = 36 mg/kg; Oral, rat: LD50 = 695 mg/kg;
Skin, rabbit: LD50 = >20 gm/kg. CAS# 25377-72-4.
Carcinogenicity:
Chloroform - Not listed by ACGIH, IARC, NIOSH, NTP, or OSHA. Amylene - Not listed by ACGIH, IARC, NIOSH, NTP, or OSHA.
Other:
See actual entry in RTECS for complete information.
SECTION 12 - ECOLOGICAL INFORMATION
Ecotoxicity:
Fish: Channel catfish: LC50 = 75 ppm; 96 Hr; UnspecifiedFish: Rainbow
trout: LC50 = 43.8 mg/L; 96 Hr; Static bioassayFish: Fathead Minnow: LC50 = 129.0 mg/L; 96 Hr; Static bioassay (pH = 7.6-8.3)Fish:
Bluegill/Sunfish: LC50 = 100.0 mg/L; 96 Hr; Static bioassayWater
flea Daphnia: EC50 = 28.9 mg/L; 48 Hr; Static bioassayThe majority of the environmental releases from industrial uses are to the atmosphere; releases to water and land will be primarily lost by evaporation and will end up in the atmosphere. Release to the atmosphere may be transported long distances and will photodegrade with a half-life of a few months. Spills and other releases on land
SECTION 13 - DISPOSAL CONSIDERATIONS Dispose of in a manner consistent with federal, state, and local regulations.
SECTION 14 - TRANSPORT INFORMATION IATA
Shipping Name: CHLOROFORM
Hazard Class: 6.1
UN Number: 1888
Packing Group: III IMO
Shipping Name: CHLOROFORM
Hazard Class: 6.1
UN Number: 1888
Packing Group: III RID/ADR
Shipping Name: CHLOROFORM
Hazard Class: 6.1
UN Number: 1888
Packing group: III
SECTION 15 - REGULATORY INFORMATION European/International Regulations European Labeling in Accordance with EC Directives
Hazard Symbols: XN
Risk Phrases:
R 22 Harmful if swallowed. R 38 Irritating to skin. R 40 Limited evidence of a carcinogenic effect.
R 48/20/22 Harmful : danger of serious damage to health by prolonged exposure through inhalation and if swallowed.
Safety Phrases:
S 36/37 Wear suitable protective clothing and gloves. WGK (Water Danger/Protection) CAS# 67-66-3: 3 CAS# 25377-72-4: No information available. United Kingdom Occupational Exposure Limits United Kingdom Maximum Exposure Limits Canada None of the chemicals in this product are listed on the DSL/NDSL list. CAS# 67-66-3 is not listed on Canada's Ingredient Disclosure List. CAS# 25377-72-4 is not listed on Canada's Ingredient Disclosure List. Exposure Limits CAS# 67-66-3: OEL-ARAB Republic of Egypt:TWA 10 ppm (50 mg/m3) OEL-AUSTRALIA:TWA 10 ppm (50 mg/m3);Carcinogen OEL-AUSTRIA:TWA 10 ppm (50 mg/m3) OEL-BELGIUM:TWA 10 ppm (49 mg/m3);Carcinogen JAN9 OEL-CZECHOSLOVAKIA:TWA 10 mg/m3;STEL 20 mg/m3 OEL-DENMARK:TWA 2 ppm (10 mg/m3);Carcinogen OEL-FINLAND:TWA 10 ppm (50 mg/m3);STEL 20 ppm;Skin;CAR OEL-FRANCE:TWA 5 ppm (25 mg/m3);STEL 50 ppm (250 mg/m3);CAR OEL-GERMANY:TWA 10 ppm (50 mg/m3);Carcinogen JAN9 OEL-HUNGARY:STEL 10 mg/m3 OEL-INDIA:TWA 10 ppm (50 mg/m3);Carcinogen OEL-JAPAN:TWA 50 ppm (240 mg/m3);Carcinogen OEL-THE NETHERLANDS:TWA 10 ppm (50 mg/m3) OEL-THE PHILIPPINES:TWA 50 ppm (240 mg/m3) OEL-POLAND:TWA 50 mg/m3 OEL-RUSSIA:TWA 50 ppm OEL-SWEDEN:TWA 2 ppm (10 mg/m3);STEL 5 ppm (25 mg/m3);CAR OEL-SWITZERLAND:TWA 10 ppm (50 mg/m3);STEL 20 ppm (100 mg/m3) OEL-THAILAND:TWA 50 ppm (240 mg/m3) OEL-TURKEY:TWA 50 ppm (240 mg/m3) OEL-UNITED KINGDOM:TWA 10 ppm (50 mg/m3);STEL 50 ppm (225 mg/m3) OEL IN BULGARIA, COLOMBIA, JORDAN, KOREA check ACGIH TLV OEL IN NEW ZEALAND, SINGAPORE, VIETNAM check ACGI TLV US FEDERAL TSCA CAS# 67-66-3 is not listed on the TSCA inventory. It is for research and development use only. CAS# 25377-72-4 is not listed on the TSCA inventory. It is for research and development use only.
SECTION 16 - ADDITIONAL INFORMATION
MSDS Creation Date: 1/16/2002 Revision #2 Date: 7/09/2002 The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and we assume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no way shall the company be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if the company has been advised of the possibility of such damages.

SECTION 16 - ADDITIONAL INFORMATION
N/A
SDS 1.0